MAY

Pennsylvania Fire Expo
May 16-18, Harrisburg, Penn.
One of the largest apparatus and equipment shows in the country.
Contact: Tina Alexander, 717-464-3291

JUNE

E-ONE EVTCC F-4 Review
June 3-7, Ocala, Fla.
A 5-day class reviewing the material covered on the EVT Certification Commission F-4 Fire Apparatus Electrical test.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

E-ONE Electrical One
June 9-13, Ocala, Fla.
A 5-day class covering basic electrical theory with emphasis on reading schematics, use of diagnostic readers and proper crimping techniques. It includes an overview of AC and DC systems with information on power distribution, load management and WABCO ABS/ATC. This class does not cover multiplex electrical systems.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

E-ONE Electrical One
June 9-13, Ocala, Fla.
A 5-day class covering basic electrical theory with emphasis on reading schematics, use of diagnostic readers and proper crimping techniques. It includes an overview of AC and DC systems with information on power distribution, load management and WABCO ABS/ATC. This class does not cover multiplex electrical systems.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Pierce Chassis Electrical
June 10-11, 2008, Appleton, Wis.
An introductory class to the non-multiplex electrical system found on Pierce Quantum, Saber, and Arrow chassis. It covers wiring diagrams, battery charging system, power distribution system and various control systems.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

Pierce Command Zone II
June 12-13, 2008, Appleton, Wis.
Instructs students on the Pierce Command Zone, Revision D, multiplex electrical system. Provides a list of suggested test equipment and spare parts.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

E-ONE Electrical Two
June 16-20, Ocala, Fla.
A 5-day class covering advanced electrical theory with emphasis on troubleshooting. It includes material on load management, transmission and engine interfaces, Jacobs engine brakes, Telma retarders, starting systems and pump interlocks. Prerequisites are either the E-ONE Electrical One class or the EVTCC F-4 certification.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Pierce Aerial Maintenance
June 17-18, Appleton, Wis.
Provides instruction on the maintenance and repair of Pierce aerial ladders and platforms including the electrical and hydraulic systems. Also covers the 50-hour and 400-hour inspections.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

Pierce CAFS and Husky Foam System
June 19-20, Appleton, Wis.
Provides instruction on the basic repairs and maintenance of the Pierce foam equipment, including the related electrical and hydraulic systems.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

E-ONE Multiplex Electrical System
June 23-25, Ocala, Fla.
A 3-day class reviewing the E-ONE multiplex electrical system operation, components and troubleshooting.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Hale Pump Maintenance and Operations Seminar
June 23-27, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx

JULY

Hale Pump Maintenance and Operations Seminar
July 14-18, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx

Drive to Survive: Preventing Fire Apparatus Crashes
July 21, Spring Township, Penn.
Safe driving techniques for fire apparatus operators. Class will be held at the Spring Township Volunteer Fire Department.
Contact: Drive to Survive, 610-960-7248; http://www.drivetosurvive.org

E-ONE Aerial One
July 21-25, Ocala, Fla.
A five-day class covering all aspects of E-ONE aerials, including the electrical and hydraulic systems, with an emphasis on preventive maintenance.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

E-ONE Aerial Two
July 28-Aug. 1, Ocala, Fla.
A five-day class covering all aspects of E-ONE aerials, including the electrical and hydraulic systems, with an emphasis on troubleshooting and repair.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Emergency Vehicle Maintenance Academy
July 28-Aug. 1, Greeley, Colo.
Maintenance classes on pumps, electrical systems, foam systems, extrication tools, breathing air compressors and small engines. Hands-on instruction in various welding techniques. Several shop management classes.
Contact: Colorado Fire Mechanics Association; http://www.co-fma.com

AUGUST

Spartan Chassis Fire Truck Training Conference
Aug. 3-7, Lansing. Mich.
This is a very large, very comprehensive training conference that offers a wealth of classes for technicians, maintenance chiefs, and fire apparatus manufacturers. The registration fee remains at $150 per person for the entire week, which makes it one of the best bargains around. Go to the Web site for a list of classes and registration instructions.
Contact: Andrea Allen, 517-543-6400, andrea.allen@spartanchassis.com; http://www.spartanchassis.com/ft/ftevents.asp

Pierce Chassis Electrical
Aug. 5-6, Appleton, Wis.
An introductory class to the non-multiplex electrical system found on Pierce Quantum, Saber, and Arrow chassis. It covers wiring diagrams, battery charging system, power distribution system and various control systems.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

E-ONE EVTCC F-6 Review
Aug. 5-8, Ocala, Fla.
A 4-day class reviewing the material covered on the EVT Certification Commission F-6 Allison Automatic Transmission test.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Pierce Command Zone II
Aug. 7-8, 2008, Appleton, Wis.
Instructs students on the Pierce Command Zone, Revision D, multiplex electrical system. Provides a list of suggested test equipment and spare parts.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

Hale Pump Maintenance and Operations Seminar
Aug. 11-15, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx

Pierce Aerial Maintenance
Aug. 12-13, Appleton, Wis.
Provides instruction on the maintenance and repair of Pierce aerial ladders and platforms including the electrical and hydraulic systems. Also covers the 50-hour and 400-hour inspections.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

Fire-Rescue International (IAFC Conference)
Aug. 14-16, Denver, Colo.
This is the big chief’s show with lots of new products on the exhibition floor. Denver is a great place to visit with lots to see and do.
Contact: IAFC; http://www.iafc.org/fri

Pierce TAK-4 Independent Front Suspension
Aug. 14, Appleton, Wis.
Provides instruction on the basic principles, maintenance, troubleshooting and repair of the Pierce TAK-4 independent front suspension.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

Pierce CAFS and Husky Foam System
Aug. 14-15, Appleton, Wis.
Provides instruction on the basic repairs and maintenance of the Pierce foam equipment, including the related electrical and hydraulic systems.
Contact: Pierce Manufacturing; http://www.piercemfg.com/CustomerService.html

E-ONE EVTCC F-5 Review
Aug. 18-22, Ocala, Fla.
A 5-day class reviewing the material covered on the EVT Certification Commission F-5 Aerial Fire Apparatus test.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Hale Pump Maintenance and Operations Seminar
Aug. 25-29, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx

SEPTEMBER

Hale Pump Maintenance and Operations Seminar
Sep. 8-12, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx

E-ONE Electrical One
Sep. 8-12, Ocala, Fla.
A 5-day class covering basic electrical theory with emphasis on reading schematics, use of diagnostic readers and proper crimping techniques. It includes an overview of AC and DC systems with information on power distribution, load management and WABCO ABS/ATC. This class does not cover multiplex electrical systems.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

E-ONE Electrical Two
Sep. 15-19, Ocala, Fla.
A 5-day class covering intermediate-level electrical system problems. Successful completion of Electrical One or possession of an EVTCC F-4 certificate is required. This class does not cover multiplex electrical systems.
Contact: E-ONE, 352-237-1122, E-onetraining@e-one.com; http://www.e-one.com/training

Wisconsin EVT Fall Seminar
Sep. 18, Location to be announced
Tentative schedule includes training on nozzle maintenance and ground ladder testing.
Contact: Jon Coutts, jdcoutts@sbcglobal.net or Mike Meyer, mf@powercom.net

Hale Pump Maintenance and Operations Seminar
Sep. 22-26, Conshohocken, Penn.
Includes instruction on pump design, construction, components, preventive maintenance, troubleshooting and testing. The first day includes optional instruction on CAFS; the last day includes an optional EVTCC test for those who have made prior arrangements with the EVT Certification Commission.
Contact: Hale Products; http://www.haleproducts.com/Main/Content,30,10.aspx