Fire Chief

The latest offerings in apparatus and components provide better capacity and efficiency.

The super-bright LED ladder walkway lighting, high handrails and full rubber rung covers provide a clear walkway for safer climbing and descending. This aerial also features an unrestricted 1,500gpm ladder waterway flow that allows firefighters to put more water where it is needed, as well as large body compartmentation to provide ample storage for all equipment.

The unit also features:

• American LaFrance Eagle chassis
• Detroit Diesel Series 60 engine
• Allison 4000 EVS-P transmission
• 238-inch wheelbase
• Meritor 21,500-pound rear axle
• Meritor 52,000-pound rear axle
• Neway AD-252 air ride rear suspension
• TwinFlow 1,500gpm single-stage pump
• 500-gallon tank
• 10kw Harrison MAS Series generator
• 24-foot aluminum rescue-style body with 205 cubic feet of usable storage, 1,000 feet of 5-inch LDH storage, 115 feet of ground ladders

From American LaFrance

Crimson Fire's Rear-Mount Pumper
When the North Greece Fire Department in Rochester, N.Y., purchased a rear-mount pumper from Crimson Fire, they got an apparatus that is distinguished by its strength, safety, storage, serviceability and style. The short and highly maneuverable pumper gets its strength from the short wheel base and the open box concept. The pump position provides increased visibility and improves operator control, making the apparatus safer to operate. Despite its compact size, the unit has more compartments than a traditional pumper, and its 283 cubic feet of storage is 82 more than larger models. Innovations in design also make the pumper easier to service while maintaining a clean, functional and well-defined style.

The unit also features:

• Crimson custom chassis
• 330hp ISC engine
• 1,500gpm Hale RMC pump
• 500-gallon water tank
• Tubular construction mounted on a Vibra-torque system
• Rear-mount operators panel for better visibility

From Crimson Fire

Darley's AutoCAFS Program Vehicle
This AutoCAFS program vehicle is equipped with a 1,500gpm single-stage pump and a 780-gallon copolymer water tank with integral 25-gallon foam tank. A color-embedded top-mount control panel with poly laminate material controls the pumping system.

Built on a Spartan "Big Easy" four-door custom chassis, the unit is powered by a 330hp Cummins ISC diesel engine coupled to an Allison EVS 3000 automatic transmission. The PolyBilt body is constructed through welding and bending co-polymer sheets. The corrosion-free body features three full-height compartments on each side, all with Robinson roll-up doors. The compartment interiors include adjustable shelves, and rollout trays are available.

Other features on this truck include a pre-connected front bumper discharge supplied by a 220cfm compressed-air foam system, which also supplies foam to the deck gun; a rear 2½-inch discharge; and the two crosslays. The crosslays are positioned right behind the cab next to the pump operator's walkway platform for safe deployment and easier reloading. A rear right-side slide-in ladder compartment holds a 24-foot two-section, 12-foot attic and 10-foot folding ladder, as well as two pike poles.

The operator panel features Fire Research combination pressure/flow meters on all the CAFS discharges, TankVision water and foam level gauges, and a Darley AutoControl pressure governor for controlling the pump.

From W.S. Darley Co.

Detroit Diesel's Series 60 Engine
For nearly 70 years, Detroit Diesel has designed, tested and manufactured engines for on-highway applications. Customers choose our engines for reliability, durability, fuel economy, weight advantages and ease of service. These qualities continue to define our 2007 product line. This is the most advanced and environmentally friendly Series 60 Detroit Diesel has ever built. Combining the company's long heritage of innovation with the resources of our parent company, DaimlerChrysler — the world's largest commercial vehicle manufacturer — we've created the Series 60 to comply with the Environmental Protection Agency's 2007 diesel-emissions standards and also deliver the performance and dependability our customers expect and deserve. We have invested hundreds of millions of dollars in engineering, testing and manufacturing to ensure that our engines meet the next, and most challenging, EPA emissions requirements. By the end of 2006, our Series 60 will have endured 14 million laboratory and on-the-road miles, running in a variety of applications.

From Detroit Diesel

Dodgen's Command Center
Dodgen Mobile Technologies is located in Humboldt, Iowa. Dodgen has manufactured police and fire command vehicles since 1994, with a 30-year history in commercial-use vehicles. The Dodgen 32-foot Command Center is our newest and largest model. This vehicle is ideal for traveling in tight alleys and in off-road applications, while allowing a staff of 10-14 to work from the vehicle as the central operations center. Dodgen also produces smaller command models, investigation labs, SWAT vehicles and other special custom models. Dodgen Mobile Technologies is a participant in the Ford QVM program, member of NTEA, and has selected models posted on GSA Advantage.

The unit also features:

• 32-foot command center
• Chevrolet Kodiak 5500 chassis
• Gas or diesel engine
• Radio dispatch workstations
• Command operations meeting room
• Galley and restroom
• Radio prep options
• Flood lighting options
• Emergency lighting options

From Dodgen Mobile Technologies

E-ONE's Bronto Aerial Platform
Designed for hard-to-reach places, the Bronto features an articulated telescopic platform, which the operator can move over obstacles to place the cage with pinpoint accuracy. With the articulating jib boom, departments can reach the roof of a 78-foot-tall building with a 22-foot parapet wall.

The unit is available in three sizes: 100, 114 and 134 feet. It can reach up to 86 feet side-to-side and stretches 15 feet below grade. (A safe clearance of at least 10 feet must be maintained from power lines.)

The aerial platform is centrally stored and does not extend beyond the front or rear of the apparatus. This design creates an apparatus that is five feet shorter than any aerial in its class. Combined with a short 230-inch wheelbase, the unit is highly maneuverable on tight streets. Additionally, the auto-leveling outrigger system sets up in less than 45 seconds, saving time on the scene.

Another feature is a platform that can swivel 45° left and right for precise placement during rescue operations and water flow.

From E-ONE

Fire Research's JackStrap
The JackStrap from Fire Research Corp. has been developed to help prevent fire hose from inadvertently coming off an apparatus while responding to or returning from an incident. The JackStrap provides a simple, inexpensive way of securing the hose end to the apparatus while in transit. It is made of heavy-duty 2-inch wide polypropylene webbing. The adjustable hose loop will fit on supply and working hose from 1½ to 5 inches. A separate shoulder loop will help the firefighter when pulling a supply line or help support a working hand line. When used on a hydrant line, the shoulder loop can firmly hold the hose to the hydrant during a hose stretch. A side pocket on the shoulder loop securely holds a hydrant tool close at hand.

The unit also features:

• Heavy-duty 2-inch polyproylene strap
• Adjustable hose loop helps secure hose to apparatus
• Adjustable hydrant loop helps with hose stretch
• Handy carry pocket holds hydrant tool
• Adjustable shoulder loop helps control nozzle

From Fire Research Corp.

Firecom's panther Series Aerial Intercom
Firecom's pantherC series is a fully digital intercom system designed for use in rugged, all-weather conditions. The durable construction is specifically designed for aerial fire apparatus and other applications in challenging high-noise environments where clear communication is required. The pantherC series intercom meets NFPA 1550 and 1901 standards.

With recessed controls, built-in headset jacks and its compact size, the pantherC series intercom is ideal for a variety of communication applications. The intercom system provides a high level of audio volume and clear digital sound.

The pantherC series intercom uses a two-wire, digital network architecture. The digital system provides clear communication for all personnel without sound degradation due to difficult weather conditions or vehicle or other ambient noise. The pantherC series provides digital-quality sound, while reducing distortion that is common with analog intercoms. Because of its digital architecture, multiple pantherC series units may be installed "in series" to provide communication over a large area without clarity or signal loss.

There are two pantherC series intercom models: the pantherC1 base station and the pantherC2 remote station.

The unit also features:

• Provides clear, digital communication
• Easy to operate
• Reduces collector ring wire requirements (only two needed)
• Easy to install
• Durable for hash environment installation
• No signal distortion or loss

From Firecom

Hannay's F1500 Hose Reels
Hannay Reels' F1500 Series hose reels are designed for use with ½-inch breathing-air hose in firefighting and rescue operations, including backpack recharging and direct-to-personnel air. All internal components are made of stainless steel and are degreased and cleaned to promote quality breathing air. The F1500 is available in manual- or power-rewind models, with a pinlock that is standard on crank-rewind models and optional on power-rewind models. Its discs, face-mount motor, frame and bearing housings are E-coated for higher corrosion protection. The F1500 is available in a variety of high-pressure ratings, thread styles, user configurations and joint types.

For more than 70 years, Hannay Reels has been helping companies around the world improve the productivity, efficiency and safety of their operations with hose and cable reels. Hannay's extensive design experience, "mass customization" production process and quality controls have made the company the leading choice among reel users and OEMs alike.

From Hannay Reels

Havis-Shields' Scene, Compartment Lights
New Magnafire 3000
150-watt, 12VDC Metal Halide HID

• No generator needed
• Brightest HID light in our market
• Reaches full intensity in 30 seconds
• Lasts up to 10,000 hours
• Interchangeable with all Magnafire fixtures
• 5-year complete fixture warranty

New "Cold Cathode" Compartment Light
Super-efficient fluorescent technology

• Draws on only 0.6amps @ 12VDC
• "Daylight" quality 4500K
• Instant "on" — full light output in seconds
• Nearly endless 18,000 hour lamp life
• Durable, low-profile, space-saving design
• 5-year complete fixture warranty

From Havis-Shields

Hendrickson's Firemaxx Suspension
Last year, Hendrickson introduced the Firemaxx heavy-duty rear air-ride suspension, designed for the rigorous demands of the fire and rescue industry. Combining a robust design with performance-enhancing features, the lightweight Firemaxx delivers numerous benefits previously unavailable in any one emergency vehicle air suspension system. With the introduction of Firemaxx, Hendrickson brings superb ride, stability and handling to fire and rescue vehicles that demand high-capacity suspensions.

Firemaxx features parallelogram suspension geometry and an integrated stabilizer system that reduces roll-steer. This reduction offers the driver greater control during lane changes, highway ramp operation and tight road maneuvers. Heavy-duty forged support beams, outboard-mounted premium torque rods and a highly engineered cross brace combine to deliver up to twice the roll stiffness of other air-ride suspensions.

Because of its design, Firemaxx provides outstanding ride quality for superior driver and passenger comfort, while helping protect critical equipment and electronics from excessive vibration. In addition, the system delivers weight savings of up to 200 pounds compared to traditional air-ride suspensions.

Firemaxx is available at 24,000- and 27,000-pound single-axle weight ratings and 48,000- and 54,000-pound tandem-axle weight ratings.

From Hendrickson Truck Suspension Systems

Marion's Custom Pumpers
Members of the Ludwig's Corner Volunteer Fire Company #1 recently purchased this custom pumper. Features include a stainless-steel body; a 2,000gpm Hale midship-mounted fire pump with nine discharge locations, including two 1½-inch and one 2½-inch crosslays; FoamPro 2002 foam system with a Power Fill system; 750-gallon poly water tank with integral foam tank; roll-up compartment doors; Firecom intercom system with headsets at each seat in the cab and one at the pump panel; Code 3 warning light system; Onan 10kw diesel generator; 900-watt Kwik-Raze telescoping Magnafire 3000 quartz lights; Ziamatic hydraulic ladder rack; storage for three 10-foot lengths of hard-suction hose; and one electric cord reel with 200 feet of cord. The chassis is a Spartan Gladiator Evolution, and the unit is powered by a 445hp Detroit Series 60 engine and Allison automatic transmission.

From Marion Body Works

Onan's Hydraulic Generators
Onan's CMHG Series of hydraulic generators are designed as a fully-integrated power package, combining the hydraulic pump, motor, generator, filtration system, oil cooler and reservoir into one compact, lightweight unit. Sized from 6- to 25kw, the CMHG Series gensets feature high-performance motor-starting capability and can run at the rated output in 1,200°F ambient conditions. Onan also offers a full line of hydraulic, diesel, gasoline, LP and PTO generators, plus dependable Cummins engines for your trucks and Cummins Power Generation standby power systems for your fire station. Local support and service for Onan generators — and all your power needs — are available through the Cummins Onan service network, with 600 locations across North America. To request the free Fire/Emergency Power Equipment CD or to locate sales and service in your area, visit our Web site.

From Onan Corp.

Pierce's Pack Mule Hose Bed
The Pack Mule ergonomic hose bed from Pierce Manufacturing brings firefighter safety to a new level. Its full-size hose bed deploys to waist level, eliminating the need to climb the apparatus while reducing risk of falls. It also provides a safer, more ergonomic position for repacking hose to help prevent stress on joints and back and shoulder injuries from lifting, pulling and positioning hose. It also minimizes strain on the heart from climbing, crawling and hunching to reach a hose.

The Pack Mule hydraulically deploys a full-size hosebed to waist level (38 to 44 inches) within 26 seconds. And when you're done, the Pack Mule — living up to its name — makes the job a whole lot easier.

The unit also features:

• Provides a comfortable, ergonomic position for pulling and repacking hose.
• Hosebed side panels conveniently flip-down for repacking.
• Hosebed can carry 1,500 feet of 5-inch hose or 1,000 feet of 5-inch hose combined with 400 feet of 2½-inch hose.
• Easy-to-use controls are located at the rear bulkhead on the driver's side.
• Powered by a transmission-mounted PTO.

From Pierce Manufacturing Inc.

RKO's 2006 Polaris 6x6 Fire Rescue Ranger
RKO Enterprises has released its new 2006 Polaris 6x6 Fire Rescue Ranger with 700cc EFI engine. This unit is the answer for fires and rescues in hard to reach areas. This new low-profile design allows for easier loading and unloading of the stretcher with patient. The construction of our stainless-steel piping systems is what really sets us apart from the competition. Each of the units features this piping: No Rust — No Scale — No Corrosion.

This unit includes a heavy-duty aluminum bed system, 100-gallon copoly tank with integral 5-gallon foam cell, 9hp Darley/Davey OHV high-performance fire pump system, foam induction, stainless-steel Hannay hose reel, Junkin rescue system, 4,000-pound winch, custom paint to your code, Whelen super LED emergency lights, Grote LED marker and brake lights, polished aluminum wheels, storage drawer, two 55-watt Hella quartz halogen scene lights, Class 1 LED lighted discharge pressure gauge, Fire Research LED Tank Vision water level gauge, and more.

From RKO Enterprises

Rosenbauer's Rear-mount Pumper
This Rosenbauer rear-mount pumper, built on an MFD chassis, gives more leg room in a cab that's four inches longer. There's a 50° cramp angle for a tighter turning radius and roll stability control to help prevent rollovers. A passenger-side rear-mount pump keeps the operator in the safest position possible. It also includes a Logi-Color operator's panel for easy, safe operation with no confusion. Whelen PS tank status lights and Fire Research Tank Vision foam level gauges let you see water and foam status from greater distances. In the pump compartment, you'll find many features designed for maximum safety and ease of use. The Rosenbauer NH-1250 normal and high-pressure pump allows you to pump and roll in forward and reverse at ideal speeds, complete with Rosenbauer Auto Prime for hands-free priming in a system that uses no oil. There's even a Rosenbauer Fix Mix High Pressure Class A foam system with CAFS-like high-pressure foam that's both economical and simple to operate. Save time and enhance safety with a 1-inch high-pressure booster reel in the rear compartment that can flow 100gpm with high-pressure foam.

From Rosenbauer

Safety Vision's Camera Systems
Safety Vision's fire and rescue product line's enhanced vision camera systems and mobile digital video recorders improve driver safety and enable full video coverage of the fire apparatus on the road and at the fire scene. The cameras enhance mobile visibility under any lighting, while the mdvrs document each response, including environmental conditions, sequence of events and personnel actions. Recorded video and audio data create permanent training aids and serve as court-admissible evidence. Fire scene recording products include the SV-LCD70 flat-screen monitor, the SV-SS22 color zoom submergible camera, and the RouteRecorder 5C MDVR.

SV-LCD70 flat-screen monitor

• 7-inch LCD screen
• Up to four camera inputs; switchable camera views
• Built-in speaker facilitates communication

RouteRecorder 5C MDVR

• Five video inputs for color or black-and-white recording
• Records up to 30fps at a standard resolution of 720 x 480 pixels
• Data is saved to a shockproof hard drive canister

SV-SS22 color zoom submergible camera

• All-weather, stainless-steel housing and anti-fog glass
• High-resolution video output
• Control box features one-touch operation of the focus, zoom and freeze functions

From Safety Vision

Smeal's Hydraulic Hose Bed Cover
Add another level of safety and convenience to your pumper with this hydraulic hose bed cover. The hose bed storage area is covered with two aluminum treadplate doors, which are hinged along the full outside length with stainless-steel piano hinges.

The doors have an 1/8-inch aluminum inner panel for superior strength. They are power-operated with a self-contained hydraulic system that smoothly opens and closes the doors one at a time. The cylinders lower into a compartment separate from the stored hose to ensure unobstructed hose deployment operations. The doors stay firmly closed in road-ready position until the operator applies the momentary switch, which is conveniently located at the rear of the truck, allowing the operator to view the doors while operating the mechanism from ground level. When open, the doors are secure and can provide support during hose reloading operations.

To provide additional safety, the power unit is operable only when the parking brake is applied. The doors are connected to the truck's open-door warning system. An audible alarm sounds when door movement begins. The cylinder pins attached to the doors are removable in the event of a mechanical or electrical failure.

From Smeal Fire Apparatus

Summit's Medium Rescue
The Moores Hill Rescue features a 14-foot aluminum rescue body on an International chassis. This unit features a drop frame alteration to maximize storage capacity while maintaining a short wheelbase. Using a process adapted and engineered by Summit Fire Apparatus, the frame alteration increases storage capacity up to 30%. The additional storage space is beneficial in more than just capacity. The added space is lower, more convenient and easily accessible. Another benefit of dropping the frame is truly transverse compartments from floor to ceiling.

The unit also features:

• International 4400 two-door chassis with 330hp engine
• 14-foot six-bay aluminum equipment body with Todco roll-up doors
• 25kw Winco PTO Generator
• 9,000-pound Ramsey quick-mount winch with front and rear receiver locations
• Power Arc lighting system with Code 3 light bar
• Compartments with an assortment of custom trays, shelves and tool boards
• Hannay hydraulic and electric reels
• Stokes basket/back board storage
• Breathing-air cascade system 6000 with fragmentation station

From Summit Fire Apparatus

SVI's Custom Rescue
SVI Trucks is the industry's premier builder for specialized fire and police emergency apparatus. We've been building custom rescue, hazmat, air/light, command/communications and bomb vehicles for more than three decades. Available on custom or commercial chassis, our aluminum or stainless-steel bodies are unrivaled for quality, dependability and rock-solid features.

This rescue vehicle is built with a Spartan Gladiator Classic 10-inch raised-roof cab. It features a severe-duty 32-inch extended bumper with two 24-inch Grover Sutterone air horns, two 100-watt CPI speakers, recessed Q2B sire, one hydraulic reel with 100 feet of hose, one low-pressure air reel with 200 feet of hose, 68-gallon diesel fuel tank, 500hp Cummins ISM engine, Allison 4000 EVS transmission, 320-amp alternator, two 750-watt FRC brow floodlights, curbside-view camera, EMS compartment, custom interior cabinets, and eight Vulcan flashlights.

The 26½-foot, 12-gauge stainless-steel body also features LED warning lights, four hydraulic hose reels, two electric cable reels, two low-pressure air hose reels, a Speedaire industrial air compressor, underbody pull-out steps, seven scba bottle fender storage, rear-mounted hydraulic winch, OnScene Solutions LED compartment lighting, rear-view camera, portable winch, rear stairway with storage compartments, Whelen LED traffic adviser and a 30kw PTO generator.

From SVI Trucks

TFT's Hard Suction Hose
Task Force Tips' large-diameter suction hose is designed for drafting water from dry hydrants, portable water tanks, swimming pools, ponds, lakes, rivers and other non-pressurized water sources. All couplings rotate easily on the patent-pending coupling system. The clear PVC hose body allows greater visibility of hose fill and remains flexible even at low temperatures, while the rigid black helix provides support and abrasion resistance. The patent-pending V-Seal, binding strip and smooth contoured shanks are secured with dual stainless-steel bands to prevent leakage and hose damage even with tight bends. Minimum bend radius is 12½ inches. All aluminum parts are hardcoat-anodized for maximum corrosion protection. The hose is not intended for pressure service.

The unit also features:

• Patent-pending "V-seal" and binding strip allows the hose to flex without leaking.
• The hose has 50% more flow visibility than the competition's.
• Unlike competitive powder-coated models, hard-coat anodized components prevent scratching and chipping.
• Hose is about 10% lighter than the competition's.
• Patent-pending polymer ring coupling allows interchangeability with TFT's unique coupling system, easy attachment or detachment of the hose, and no binding up.

From Task Force Tips

Unruh's Brush Truck
Unruh Fire Inc. was established in 2003 with the intent of building a strong, reliable, user-friendly brush truck. Our parent company, Unruh Fab Inc., has been in business for almost 35 years building over-the-road glass-hauling equipment and windshield racks and is the nation's largest manufacture of these products.

Since completing our very first truck, we have delivered trucks all over the United States from Florida to Washington and even Hawaii. Safety is our number-one priority, which is why we have a firefighter involved in every step of the build process.

Our lead designer, a 20-year active veteran of the fire service, and some of our production staff help ensure that your wants and needs are met and done right the first time, the way you want it.

Unruh Fire Inc. has several models and options available. The newest model, the Attack Mini Pumper, is just one of those. Built on a GMC 5500 chassis, this truck is equipped with some of the industry's newest technology. You need a truck built specifically to your department's style of firefighting or rescue operations. A truck that you can count on to fit all of all of your needs. A truck that will get you quickly to the scene, navigate the terrain and deliver you back home safely.

Let us help you build the truck that fits your department's needs.

The unit also features:

• 2006 GMC 5500 chassis
• 300hp Duramax diesel motor
• Allison automatic transmission
• Hale AP50 500gpm PTO-driven pump
• Hale Attack CAFS
• Hale Foam Logix 2.1 foam system
• 500-gallon APR Poly tank
• EZ fill foam system
• All aluminum rescue body

From Unruh Fire Inc.

UPF's Defender Skid Unit
The Defender S-Series from United Plastic Fabricating Inc. is a combination of various components available for firefighters that will allow fire departments to easily enhance their firefighting capability.

The Defender S-Series has storage compartments mounted on either side of the skid unit, featuring gull-wing style doors with over 20 cubic feet of storage capacity in each compartment. The Defender S-Series is designed to fit any manufacturer's long bed pick-up with a GVWR of 4,300 pounds. While designed to be budget friendly, the new unit with its slip-on tank with compartments is something every fire department will be proud to own.

The unit also features:

• Made from non-corrosive polypropylene
• 200-gallon water capacity
• Water level sight gauge
• 2½-inch NPTF suction fitting with dip tube
• 1-inch NPTF drain fitting
• Booster reel mounting blocks
• Access to water fill towers on both sides of the vehicle
• Optional pack mounted 6- or 12-gallon foam cell
• Optional diamond plate protective covers for reel area
• Optional aluminum or diamond plate end wall protective covers

From United Plastic Fabricating

Waterous' Advantus
The Waterous Co. manufactures pumps, power take-offs, CAFS and hydrants for the global fire service industry. Most recently the company was credited with developing a revolutionary proportioning system called the Advantus. This cutting-edge proportioner is designed to enhance foam efficiencies for fire apparatus equipped with or without CAFS units.

The Advantus is a sophisticated foam system that maximizes foam delivery using conductivity-based technology. Unlike volume-based systems, the Advantus accurately balances foam concentrate with water by sampling the water and subsequently the foam solution. Regardless of the water supply and foam concentrates being used, the Advantus will make the appropriate adjustments to deliver the most effective and economical foam solution, even in ultra low-flow conditions.

Powering the system is a reliable Wanner Hydra-Cell pump. Highly durable, the pump allows for proportioning of higher-viscosity foam concentrates and prevents damage from corrosion impurities in the concentrate supply. Hydra-Cell pumps also deliver repeatable, accurate output with high efficiency yielded from low power consumption.

Overall benefits from the Advantus can be seen in more economical use of foam concentrate, highly accurate foam solution delivery and a durable construction that protects against corrosion. The Advantus foam system also comes with an exclusive two-year warranty and the best service and support in the industry.

From The Waterous Co.